BATC MiniTiouner & Knucker Cases

Want to give your BATC MiniTiouner or Knucker receiver a professional looking finish? I offer front & rear panels to fit the Hammond 1455N1202 Enclosure. The kit includes:

Front & Rear panel pair: £20, with OLED Display and cable kit £30

Knucker version front & rear panels £18 (no OLED display cut-out, but includes screen printing). First deliveries during late May 2021. Pre-order discount of £3.

Front Panel
Rear Panel

23 thoughts on “BATC MiniTiouner & Knucker Cases

  1. David Bondy G4NRT

    Hi Justin. I absolutely definitely want one of these with the display and bits. I’m only down the road in Rochester so could collect and save you a trip to the post office.

    I could pay now if that helps and guarantees me a pair of panels with the display etc etc. Please let me know.

    73. David G4NRT

    Reply
    1. Justin CockettJustin Cockett Post author

      Hi Dave, Julie’s mum is in Rochester, so we can probably deliver one Tuesday. Don’t worry about the cash yet, we’ll do that nearer the time when I have the stock in.

      Reply
      1. Chris Pegrum

        Juatin, I will email you as I dont get the replies unless i keep your page open. I should be at CATS Bizzar if your going.

        Reply
  2. Terry G0EZY

    Hi Justin

    Sounds good! Is PayPal F+F OK? If so, what is your PayPal reference info?

    73 Terry
    On 09/01/2020 23:47, Justin Cockett wrote:
    > Hi Terry,
    >
    > Yes I have them in stock,
    >
    > £20 for the panels
    >
    > £30 for the panels and OLED display and cable kit.
    >
    > Includes postage and VAT
    >
    > I don’t yet have a panel for the second stream, but I’ll certainly sell a replacement single panel at a later date.
    >
    > Justin.

    Reply
  3. Terry G0EZY

    Hi Justin
    Not sure if you reply to comments on this weblink or to direct emails!

    Just to confirm: I would like to order the panels and the OLED+cables.

    Thanks
    73 Terry

    Reply
  4. Dragan 4O6DM

    HI Justin,
    Just to confirm: I would like to order the panels and the OLED+cables.
    73 de Dragan
    Dragan Milosevic
    Vuka Mandusica 16
    81000 Podgorica
    MONTENEGRO

    Reply
    1. Justin CockettJustin Cockett Post author

      Hi, the product is designed to fit the BATC project Minitiouner v2 PCB. The case is a standard Hammond case, I supply the front and rear panels and the OLED and cable kit as an option.

      Reply
  5. Barry G4ZCN

    Justin

    do you have any of the end panel kits etc available?

    I am looking for 2 sets of end panels and one kit complete with the LED / cables.

    You can invoice my email address at Paypal.

    best regards,

    Barry

    Reply

Leave a Reply to Justin Cancel reply

Your email address will not be published. Required fields are marked *